Aluminium End-For-End Spinnaker Poles

There is no need to wait for Seldén to build your customized spinnaker pole. You can easily build it yourself from one of our kits. Or we will, of course, be happy to do the job for you. The prices here are for the kits which will need cutting to the correct length and assembling. 

The end fittings are made of glass fibre reinforced polyamide composite. This material makes for a combination of low weight and strength and it also prevents damage to boat or mast when the pole is on the fore deck. The claw has a well rounded stainless chafe guard, preventing damage to sheet and guy. The stainless, spring loaded plunger is operated at the end fitting or with the release line. Spinnaker pole lift and downhaul are attached to lift eyes in the middle of the pole or to a bridle.   

48-60 mm diameter poles have end fittings 534-865 x 2.

72-96 mm diameter poles have end fittings 534-854 x 2

See the data sheet on the ATTACHMENTS tab below for information on the correct pole for your boat.

Alternatively get in touch and we can advise on the correct size for your boat and build the pole for you.