For the Hunter Channel 323, the information below is intended as a model-level planning tool rather than a substitute for checking the rig actually fitted to the yacht. The kicker recommendation is presented as a separate equipment option, allowing it to be considered during the refit without treating it as part of the standing-rigging set. Even apparently standard production boats can acquire different fittings over time, so photographs and measurements from the current rig are more useful than relying on the model name alone. If the old rigging is available, copying the original stay set after checking its condition and dimensions is usually more dependable than manufacturing solely from a model-based schedule.

Yacht and rig details

ProductionUnited Kingdom, 2002–2012
LOA11.34 m
Beam3.72 m
Displacement4,490 kg
RigSloop
Mast steppingDeck stepped
Spreaders2

Channel 323 standing rigging

Indicative forestay/backstay/shroud diameter7 mm
Rigging type1x19 stainless steel wire
Indicative standing rigging cost£2,202 – £2,424 inc VAT

Furler and kicker recommendations

Genoa furler Furlex 204S — 6 mm / 13300 mm
Rodkicker Seldén Rodkicker 30 (Normal Gas)

Mast and boom recommendations

Suggested mast sectionC170
Indicative mast height14.00 m
Suggested boom sectionE270
Indicative boom foot length3.92 m
ReefingSlab reefing (2 reef lines)

Channel 323 running rigging

LineDiameterLengthSuggested rope
Main halyard 10 mm 30.2 m Dyneema
Genoa halyard 10 mm 31.6 m Dyneema
Spinnaker halyard 10 mm 34 m Dyneema
Genoa sheets 12 mm 18.1 m per sheet Marlow Ocean Braid
Main sheet 12 mm 22.6 m Marlow Ocean Braid

These specifications and prices are indicative only and should be verified against the rig and existing equipment on the individual yacht.

Boxed:

Sticky Add To Cart

Font: