This guide gives Contest 29 owners a structured way to plan standing-rigging replacement alongside the other mast and deck equipment that may be involved. The model page is intended to support both a simple standing-rigging replacement and a broader refit where ropes, furling equipment or deck hardware are being reviewed at the same time. Factory options and later refits can produce meaningful differences between sisterships, particularly around the forestay, furler, mast terminals and lower attachment points. Before manufacture, confirm every stay’s material and diameter, finished length, upper and lower terminal type, pin size, rigging-screw thread and the complete forestay or furler interface.

Yacht and rig details

ProductionNetherlands, 1964–1976
LOA8.84 m
Beam2.51 m
Displacement3,856 kg
RigMasthead sloop
Mast steppingDeck stepped
Spreaders1

29 standing rigging

Indicative forestay/backstay/shroud diameter6 mm
Rigging type1x19 stainless steel wire
Indicative standing rigging cost£1,570 – £1,725 inc VAT

Furler and kicker recommendations

Genoa furler Furlex 104S — 7.80 m
Rodkicker Seldén Rodkicker 10 (Normal Gas)

Mast and boom recommendations

Suggested mast sectionC211
Indicative mast height12.82 m
Suggested boom sectionE300
Indicative boom foot length3.78 m
ReefingSlab reefing (2 reef lines)

29 running rigging

LineDiameterLengthSuggested rope
Main halyard 10 mm 28.1 m Marlow Ocean Braid
Genoa halyard 10 mm 29.4 m Marlow Ocean Braid
Spinnaker halyard 10 mm 31.6 m Marlow Ocean Braid
Genoa sheets 12 mm 14.1 m per sheet Marlow Ocean Braid
Main sheet 12 mm 18.1 m Marlow Ocean Braid

These specifications and prices are indicative only and should be verified against the rig and existing equipment on the individual yacht.

Boxed:

Sticky Add To Cart

Font: