The Westerly Berwick 31 guide helps owners decide what may need replacing, what can be priced indicatively and what still needs measuring. The running-rigging table gives a separate starting point for halyards and sheets, so rope replacement can be planned without confusing it with the standing-rigging specification. The existing yacht should therefore take priority over any generic model assumption, especially where a mast, furler or set of rigging screws has been replaced before. If the old rigging is available, copying the original stay set after checking its condition and dimensions is usually more dependable than manufacturing solely from a model-based schedule.

Yacht and rig details

ProductionUnited Kingdom, 1973–1980
LOA9.45 m
Beam3.12 m
Displacement4,351 kg
RigMasthead sloop
Mast steppingDeck stepped
Spreaders1

Berwick 31 standing rigging

Indicative forestay/backstay/shroud diameter6 mm
Rigging type1x19 stainless steel wire
Indicative standing rigging cost£1,597 – £1,754 inc VAT

Furler and kicker recommendations

Genoa furler Furlex 104S — 8.50 m
Rodkicker Seldén Rodkicker 10 (Normal Gas)

Mast and boom recommendations

Suggested mast sectionC095
Indicative mast height13.65 m
Suggested boom sectionE169
Indicative boom foot length3.82 m
ReefingSlab reefing (2 reef lines)

Berwick 31 running rigging

LineDiameterLengthSuggested rope
Main halyard 10 mm 29.6 m Marlow Ocean Braid
Genoa halyard 10 mm 30.9 m Marlow Ocean Braid
Spinnaker halyard 10 mm 33.3 m Marlow Ocean Braid
Genoa sheets 12 mm 15.6 m per sheet Marlow Ocean Braid
Main sheet 12 mm 20.5 m Marlow Ocean Braid

These specifications and prices are indicative only and should be verified against the rig and existing equipment on the individual yacht.

Boxed:

Sticky Add To Cart

Font: