The Seldén winch pads fit all mast sections and are easy to install. Each winch pad is labelled with instructions for  fitting to winch bases. The pads have a 5° angle to prevent override on the winch (reefing winch pads 15°). They are corrosion insulated with plastic insulating sheet  and have well-rounded corners to avoid sail chafe. Seldén offers winch pads for halyard winches and reefing winches.

Backstay flicker – gives the mainsail space to move The backstay flicker is a glass fibre rod fitted to the head box on a fractional rig with swept spreaders. It lifts up a wire or rope backstay to allow for free passage of a full roach mainsail. The backstay flicker comes complete with fasteners and back stay block. Select from the three size to suit your boat. Batten Length :1200mm for boats <30ft. Batten Length :1400mm for boats 30-37ft. Batten Length :1800mm for boats 37-43ft.

A Lazy Jack system is an active aid for containing the mainsail when reefing and dousing. Our lazyjack system works exceptionally well with fully-battened mainsails, but it is also very handy for use with conventional sails.  We can supply complete lazyjack kits , either in 2-leg or 3-leg form as shown below, with all the necessary blocks, eye straps, lines, fasteners, boom sliders and full  instructions. We can also build and fit custom systems, if you would like advice on this please get in touch and one of our rigging experts can help out.

Replacements sheaves. Please check the measurements carefully before ordering. If you have any questions please get in touch and one of our rigging experts can help out.

The Selden Grease Hole Cover is a small but essential component designed to protect the grease hole on a mast or boom. It helps to keep the grease inside the fitting, ensuring smooth and efficient movement of the mast or boom components. It provides long-lasting protection against the harsh marine environment.

The use of halyard leads ensures the proper angle between the halyard and a roller furling unit so as to minimize the possibility of halyard wrap when the sail is furled or unfurled. Including insulation plate and fixings. These are specifically designed to be used with stainless steel wire halyards as it will prevent the wear of the wire. The “U” contour design makes it simple to retro fit.

Selden halyard lead fitting in stainless steel. Includes pop rivets. The fitting is to be lacquered inside to insulate it from the mast. The fitting must only be used with rope (not wire halyards). Please use the specification information on the MORE INFORMATION tab to make sure the correct lead is ordered.

Seldén Mast has launched a foldable mast climbing step. Made from anodized aluminium, the step is ideal for helping users reach the main halyard or sail cover. It can also be strategically fitted at the head to provide a stable platform when working on instruments or installed at intervals along the mast for easier access during maintenance.

Selden O-fittings for forestays are designed to provide a secure and reliable attachment point for forestays on masts. These fittings are typically used to attach an inner or removable forestay, allowing for articulation of a swaged eye terminal or a bite for a soft eye on a Dyneema stay.

Single Sheave Box designed to manage halyards and other lines on a mast. These sheave boxes are designed to provide smooth and efficient operation for halyards and other lines, ensuring reliable performance in various sailing conditions.

Aluminium double sheave box with rivits. These sheave boxes are designed to provide smooth and efficient operation for halyards and other lines, ensuring reliable performance in various sailing conditions.

These fittings are designed to reduce mast friction and avoid wear from the wire halyards on the mast extrusion. They are made from high-quality stainless steel for durability and corrosion resistance.

Stainless steel spinnaker halyard block masthead bracket. For use with sections: E189-E206, R190-R213, C156-C227, F176-F228.

These spreader ends are designed to provide secure attachment points for spreaders on masts, ensuring stability and durability. 

These spreader ends are designed to provide secure attachment points for spreaders on masts, ensuring stability and durability. 

These spreader ends are designed to provide secure attachment points for spreaders on masts, ensuring stability and durability. 

These spreader ends are designed to provide secure attachment points for spreaders on masts, ensuring stability and durability. 

The Selden U-BOLT M12 ASSY (for head box) is a high-quality stainless steel U-bolt assembly designed for use with head boxes on masts.

Stopper Pad for mounting clutches - 106mm X 150mm, made from Aluminium.  For mounting clutches and is designed to provide a secure and stable mounting surface for clutches on masts.

Selden sail entry gate for E and D mast section. Sail slides are fed in to this spring-loaded gate. When reefing, the sail slides pass through the closed gate down to the boom, holding the sail in place and facilitating fast and safe reefing. Large size for: E138, E155, E170, E177, E189, E206, E224, E237, E274 mast sections. Small size for: E122, E130, D109, D121 mast sections.