A great solution for any application where you want to attach and remove quickly, for example runners and check stays. Just replace the standard shackle with a snap shackle.

Low Friction Shackle have a well rounded loop allowing the rope to slide at low friction. Its lighter and easier to operate than a regular snatch block. Typically used on barber haulers for spinnakers and jibs.Available in four sizes - 50, 60, 80 & 100.

Halyard Swivel Shackle

Double Halyard Swivel Shackle. For hauling out a jib sheet off the wind, and other temporary line routing.

Standard stainless steel key pin and bar shackle.

Forged CE stainless steel Allen pin D shackle. The head of the pin does not stick out from the shackle's body, thus eliminating any risk of snagging. Hot dropped forged from a single piece of stainless steel, adding strength and consistency of manufacture for total security and reliability. The technical characteristics of every Shackle is closely controlled and tested before, during and after the manufacturing process. Manufactured from AISI 316 stainless offering excellent corrosion resistance, especially in marine environments.

Forged CE stainless steel Allen pin long D shackle. The head of the pin does not stick out from the shackle's body, thus eliminating any risk of snagging. Hot dropped forged from a single piece of stainless steel, adding strength and consistency of manufacture for total security and reliability. The technical characteristics of every Shackle is closely controlled and tested before, during and after the manufacturing process. Manufactured from AISI 316 stainless offering excellent corrosion resistance, especially in marine environments.

These shackles are stylish and very reliable. Their special shape enables an end to be directly spliced without adding an additional thimble. The stainless steel shackles with a thimble moulded over the top are designed for boats under 60 foot long. The pin is also connected to the body at all times, even when fully opened, consequently, there is no more risk of seeing it fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand.

Forged CE stainless steel captive pin D shackle. Captive pin 'patented'. Not only are these self-locking, the pin is also connected to the body at all times, even when fully opened. Consequently, there is no more risk of seeing it fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand. Hot dropped forged from a single piece of stainless steel, adding strength and consistency of manufacture for total security and reliability. The technical characteristics of every Shackle is closely controlled and tested before, during and after the manufacturing process. Manufactured from AISI 316 stainless offering excellent corrosion resistance, especially in marine environments.

Forged CE stainless steel captive pin bow shackle. Captive pin 'patented'. Not only are these self-locking, the pin is also connected to the body at all times, even when fully opened. Consequently, there is no more risk of seeing the pin fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand. Hot dropped forged from a single piece of stainless steel, adding strength and consistency of manufacture for total security and reliability. The technical characteristics of every Shackle is closely controlled and tested before, during and after the manufacturing process. Manufactured from AISI 316 stainless offering excellent corrosion resistance, especially in marine environments.

Strip shackle with key pin and removable bar. Stainless steel AISI 316

Forged stainless steel HR key pin shackle and bar. Half turn opening captive pin shackle with removable bar. 'HR' stands for High Resistance. Shackle forged in HR 17.4 Ph stainless steel can be up to 60% more resistant than a shackle made from 316L stainless steel. Hot dropped forged from a single piece of stainless steel, adding strength and consistency of manufacture for total security and reliability. The technical characteristics of every Shackle is closely controlled and tested before, during and after the manufacturing process.

Snap Shackle with Swivel 70mm. Made in 316 stainless steel.

Snap Shackle with Fixed Eye. Made from 316 stainless steel.

Forged stainless steel swivel, eye, quick release snap shackle. The totally smooth oval shape of Wichard quick-release snap shackles make them ideal for brace and spinnaker sheet manoeuvres. The snap shackle opens immediately, and can be released effortlessly using a control line. Forged in HR Stainless Steel. Ideal for genoa and spinnaker sheets.

Standard stainless steel long D shackle. Fully guaranteed they offer exceptional quality and value. Featuring round bodies and forged pins for extra security. Manufactured from AISI 316 stainless steel.

>Standard stainless steel D shackle. Made in 316 stainless steel.

Standard galvanised bow shackle. Galvanised steel. Stamped with the WLL. This type of shackle should not be used for over head lifting.

Forged Twisted Shackle Made in 316 stainless steel.

Standard stainless steel wide D shackle. Fully guaranteed they offer exceptional quality and value. Featuring round bodies and forged pins for extra security. Manufactured from AISI 316 stainless steel.