Replacement Yacht & Dinghy Standing Rigging Quotes Using Our New CUSTOM BUILD Standing Rigging Calculator

We now offer three yacht standing rigging replacement options. 

• Use our convenient CUSTOM BUILD Standing Rigging Calculator to configure the rigging you need, we provide an instant on-line quote, you can order and we deliver your rigging nationwide.
• Alternatively get in touch to arrange to SEND YOUR RIGGING to our Port Solent Workshop, where we will use it as a template to build your new rigging and deliver it back to you.
• Additionally, we’re very experienced in handling all the work needed for a RE-RIG AT A MARINA in the Chichester-Portsmouth-Southampton area.

To use our CUSTOM BUILD Standing Rigging Calculator, simply select the type of rigging you require below or if you need any advice or would prefer to talk to one of our rigging experts about your requirements please get in touch.

Yacht standing rigging comprises the fixed lines, wires, or rods, that support each mast or bowsprit on a sailing vessel and reinforce those spars against wind loads transferred from the sails. This term is used in contrast to running rigging, which represents the movable elements of rigging that adjust the position and shape of the sails. At Martin Leaning Masts and Rigging we are experts in all types of rigging and can help you enhance, maintain and replace your rigging.

Replacing Yacht Standing Rigging: A Step-by-Step Guide for Sailors

Standing rigging is a critical component of a sailboat’s mast support system, ensuring stability and performance. Over time, rigging deteriorates due to metal fatigue, corrosion, and wear, making replacement essential for safety and efficiency. This guide covers the key steps to replacing standing rigging, whether with the mast up or down.

When Should You Replace Yacht Standing Rigging?

Most insurance companies recommend replacing standing rigging every 10 years, though well-maintained rigging can last up to 20 years. Signs that replacement is necessary include:

• Frayed or corroded wires
• Loose or damaged terminals
• Visible cracks or fatigue in fittings
• Difficulty maintaining proper tension

Step-by-Step Process for Replacing Standing Yacht Rigging

1. Inspect the Existing Standing Rigging Conduct a thorough masthead-to-deck inspection to identify worn components. If the mast is stepped, use a bosun’s chair to check fittings at height.

2. Decide on Mast-Up or Mast-Down Replacement
   • Mast-down: Easier for full rigging replacement, allowing better access.
   • Mast-up: Requires temporary halyards or spare lines to support the mast while replacing wires one by one.
3. Measure and Order New Standing Rigging
   • Use precise measurements to ensure correct wire lengths.
   • Consider swaged terminals for a professional finish or mechanical terminals for DIY installation.
4. Remove Old Standing Rigging
   • Loosen turnbuckles and carefully detach each wire.
   • Take photos and mark tension settings for reference.
5. Install New Standing Rigging
   • Attach new wires, ensuring correct alignment and tension.
   • Use Sta-Lok or Bluewave swageless terminals for easy fitting.
6. Final Inspection and Rig Tune
   • Check for proper mast rake and bend.
   • Ensure athwartship vertical alignment and correct tensioning.
   • Conduct a test sail to verify performance.

Best Practices for Yacht Standing Rigging Maintenance

• Regular Rigging Inspections: Check rigging at least once per season.
• Lubrication: Apply anti-corrosion treatments to terminals.
• Professional Checks: Consider expert assessments for long-term reliability.

Replacing yacht standing rigging may seem daunting, but following a structured approach ensures a safe and efficient upgrade. However, if this process feels too complex or time-consuming, the team at Martin Leaning offers professional yacht rigging services to handle everything for you. 

More Information on:

Standing Rigging: Step by Step Guide To Re-rigging your Yacht

Choosing the Right Wire for Yacht Standing Rigging

Types of Terminations for Stainless Steel Wire

Seldén Rigging Screws: Types and Features